STAR TRACE Eddy Current Separators devices are an effective way of removing non-ferrous metals from other products. Application such as aluminum cans from municipal waste, aluminum flakes from shredded PET, brass and aluminum from foundry sands, and metals from shredded automobile scrap, other metals such as lead can also be removed. For successful non-ferrous separation, a magnet should be installed prior to an Eddy Current Separators.
STAR TRACE Eddy Current Separators are ready to be installed for separation. This eddy current separators utilizes a powerful Eddy Current Rotor, Conveyor Belt, two variable discharge area and support frame. The optional vibratory feeder provides a consistent flow of material to the Eddy Current Separators. The main principle is that 'an electrical charge is induced into a conductor by changes in magnetic flux cutting through it'. Moving permanent magnets passing a conductor generates the change in magnetic flux.
Eddy current separators are designed according to the principle that conductor can generate induced current in the high-frequency alternating magnetic field. A strong high-frequent magnetic alternating magnetic field generates on the surface of the sorting roller when it works, thus when conductive non-ferrous metals pass through the magnetic field, eddy current separators will be induced in the body of non-ferrous metals. The eddy current separators itself will generate the opposite direction magnetic field, non-ferrous metals (such as aluminum, copper, etc.) will leap forward along its transport direction by the performance of magnetic field repulsion so as to separate other non-metallic substances and achieve the purpose of sorting. The main distinguishing criterion is material conductivity and density ratio values; a high percentage of the value of the material is more easily to be separated than the lower material.
STAR TRACE Eddy Current Rotor uses an alternating magnetic field to produce electrical currents in conductive metal. The electrical current generates its own magnetic field around an object which opposes the magnetic field from the Eddy Current Separators. This repulsion diverts the object from the product stream. Mass, conductivity and density influence the force and distance an object will repel.
Eddy current separators are based on the use of a magnetic rotor with alternating polarity, spinning rapidly inside a non-metallic drum driven by a conveyor belt. As non-ferrous metals pass over the drum, the alternating magnetic field creates eddy currents in the non-ferrous metal particles repelling the material away from the conveyor. While other materials drop off at the end of the conveyor, the non-ferrous metals are propelled forward over a splitter for separation.
STAR TRACE Eddy Current Separation System encompasses all the equipment above necessary to separate non-ferrous metals and adds ferrous metal separation equipment. It is important to remove ferrous metal prior to exposure to the Eddy Current Separators. Ferrous metal is attracted and held by the strong magnetic force. The ferrous metal will heat up and could burn holes in belt and cause significant damage to the Eddy Current Rotor.
The following are the benefits of Eddy Current Separators are:
|Feed||Rotor Motor||Belt Motor||Vibration Motor||Belt Width||A||B||C||D||E|
|ECMS - 300||5.5 KW||0.4 KW||0.12KW x 2||450||1380||4000||3225||1850||1800|
|ECMS - 450||5.5 KW||0.75 KW||0.12KW x 2||600||1530||4000||3225||1850||1800|
|ECMS - 600||5.5 KW/7.5 KW||0.75 KW||0.12KW x 2||750||1680||4000||3225||1850||1800|
|ECMS - 750||7.5 KW||0.75 KW||0.25 KW x 2||900||1830||4000||3225||1850||1800|
|ECMS - 900||7.5 KW/11 KW||1.5 KW||0.4 KW x 2||1100||2030||4000||3225||1850||1800|
|ECMS - 1200||11 KW||1.5 KW||0.4 KW x 2||1400||2330||4000||3225||1850||1800|
|ECMS - 1400||12.1 KW||2 KW||0.4 KW x 2||1600||2530||4000||3225||1850||1800|
|Capacity Per 1000mm Feed Width (Tonnes/Hour)|
12 - 30 mm
30 - 70 mm
50 - 150 mm